License Pool Over-Allocation Alarm

The alarm is applicable only to devices supporting the Fixed License.

acLicensePoolOverAllocationAlarm

Alarm

acLicensePoolOverAllocationAlarm

OID

1.3.6.1.4.1.5003.9.10.1.21.2.0.125

Description

The alarm is sent when the SBC license received from the OVOC License Pool has exceeded the maximum capacity supported by the device.

Alarm Source

system0Mo

Event Type

communicationsAlarm

Probable Cause

Overallocation

Severity

Condition

Text

Corrective Action

Warning

The SBC license received from the License Pool has exceeded the maximum capacity supported by the device.

(Sent after the configuration has been applied in the License Pool; but prior to a device restart or hitless upgrade.)

“License Pool Alarm. Some of the license pool allocations exceed maximum capability and will not be applied”

In the OVOC License Pool, do one of the following:

■

Apply the new license (restart device or apply hitless upgrade); the device sets its SBC capacity to maximum and disregards the excess configured sessions.

■

Reconfigure the license sessions with values that fall within the device capacity and then apply the new license (restart device or apply hitless upgrade).

Warning

The SBC license received from the License Pool has exceeded the maximum capacity supported by the device.

(Sent after a device restart.)

“License Pool Alarm. Some of the license pool allocations will not be used because of over-allocation”

In the OVOC License Pool, reconfigure the license sessions with values that fall within the device capacity and then apply the new license (restart device or apply hitless upgrade).